Hypertherm Nozzle, Plasma Cutting Nozzle, Powermax Macine Nozzle
Shanghai ZhouBo Welding & Cutting Technology is a professional
manufacturer plasma consumables electrode, nozzle, shield, swirl
ring, inner cap, retaining cap, water tube, torch body and so on.
Plasma cutting is a process that cuts through electrically conductive materials
by means of an accelerated jet of hot plasma. Typical materials cut
by this process include steel, aluminum, brass and copper though other conductive metals may be cut as well.
Plasma cutting is often used in fabrication and welding shops,
automotive repair and restoration, industrial construction, salvage
and scrapping operations. Due to the high speed, precision cuts,
combined with low cost of operation, plasma cutting sees a
widespread usage from large scale industrial CNC applications down
to small hobbyist shops.
|Machine||HEC NO.||Ref NO.||Description|
|H33754||220754||Retaining Cap 30/50Amp|
|H33176||220176||Retaining Cap 80/130Amp|
|H33355||220355||Retaining Cap 200Amp|
|H33433||220433||Retaining Cap 260Amp|
|H33603||220603||Retaining Cap (Bevel) 130/260Amp|
|H33756||220756||Retaining Cap 80/130Amp|
|H33757||220757||Retaining Cap 200Amp|
|H33760||220760||Retaining Cap 260Amp|
|H33635||220635||Retaining Cap 400/400Amp(Bevel)|
|H33740||220740||Retaining Cap (Bevel) 130/260Amp|
|H43173||220173||Retaining Cap 30/50/80/130Amp|
|H43398||220398||Retaining Cap 200/260/(Bevel)130/260Amp|
|H43747||220747||Retaining Cap 30/50/80/130Amp|
|H43637||220637||Retaining Cap 200/260/400Amp(Bevel)|
|H83818||128818||HPR torch assembly|
|H93571||220571||Water Tube with O-Ring|
|H93340||220340||Water Tube with O-Ring(30/50/80/130/200/260Amp)|
|H93700||220700||Bevel water tube(mild steel-130A)|
Method for prolonging the service life of the plasma wearing parts
apply the splash proof chemical coating on the protective cover
Splash proof chemical coating helps to reduce slag accumulation in
the protection cover. But it must be removed from the protective
cover on the cutting torch to splash paint coating.
10 remove protective cover on the slag
Frequently clear the torch on the protective cover in slag,
otherwise this slag will cause heavy destructive plasma arc".
Discharge of residual gases in advanced torch 11 after the
replacement of wearing parts
In replacement of wearing parts for a long time or stop, should
discharge torch in the residual gas (2 ~ 3 minutes is appropriate)
to ensure that the steam discharged from the torch.
To keep the 12 torch and wearing clean
In the cutting torch and wearing any stolen goods will seriously
affect the function of plasma system. Replacement of wearing parts,
to put it in a clean flannelette, and should always check the torch
connecting thread, with hydrogen peroxide cleaning cleaning of the
electrode contact surface and the nozzle.
1. clear air or oxygen nozzle oxides
When the air or oxygen is used as the plasma gas, the oxide is
deposited in the nozzle, which can affect the cutting airflow and
reduce the life of the wearing parts. Wipe clean with cloth inside
the nozzle can eliminate the oxide.
2. using softened water injection (plasma torch with liquid cooling
Hard water can cause metal impurities deposited on the nozzle ring,
which will affect the cutting air flow, thereby reducing the
cutting quality and shorten the service life of wearing parts.
3. check air flow and coolant every day
Damage to the torch of the most common causes of the lack of
coolant, which need to regularly check leading to the torch gas
flow and pressure (air), check the coolant pressure (liquid), if it
is found that the flow is not enough or leak, immediately stop and