Koike Plasma Nozzle PK030063 3.0R For Super 400 Plasma Cutter
Machine Torch Accessories
Koike plasma Cutting machine super 400 accessories, plasma
consumables. Koike plasma super 400 plasma cutting accessories, Koike super 400 plasma torch parts. Koike plasma cutter nozzle PK030068 2.3L,
plasma cutting nozzle PK030067 2.3R, nozzle PK030062 2.5L, nozzle PK030060 2.5R, nozzle PK030063 3.0R, nozzle PK030061 3.0L, Koike electrode PK031027 A type, electrode PK40008459 P type, Koike super 400 swirl ring R PK031204, swirl ring PK031205 L, Shield PK031332,
plasma cutter water tube PK405152. plasma retaining cap PK031336,
Shanghai ZhouBo Welding & Cutting Technology company are a
professional manufacturer of plasma cutter consumables, Our company
is located in the Shanghai City, China ,it was established in
2007,but we had 10 years manufacturing experience in this field,
the new factory covers an area of more than 10000 square meters
.There are 50-100 workers and 20 research engineers.
|Machine||HEC NO.||Ref NO.||Description|
|X78204R||PK031204||Swirl Ring "R"|
|X78205L||PK031205||Swirl Ring "L"|
|X48360||PK031360||Retaining Cap 400-OPS|
|X48324||PK031324||Retaining Cap 401/402-OPS|
|X48336||PK031336||Retaining Cap 600-OPS|
|X88709||PK031709||Torch Body 400-OPS|
|X88744||PK031744||Torch Body 401-OPS|
|X88738||PK031738||Torch Body 402-OPS|
|X88054||PK40005054||Torch Body 600-OPS|
The maintenance of the plasma torch
1. to correctly install the torch
Correctly and carefully install the torch, and to ensure that all
the parts fit together well, and ensures the cutting gas and
shielding gas flow, before the installation will be all the
components on a clean cloth, avoid dirt adhesion to components. In
the "O" type ring with a little lubricant, "O" - shaped ring is
appropriate, should not be more.
2. the wearing parts should be replaced in time before the complete
Vulnerable parts are not used completely damaged after the
replacement of, because of serious damage to the electrode, the
nozzle and the eddy current ring will can not control the plasma
arc, cutting torch damage easily. So for the first time found that
the quality of cutting down, it should be timely inspection and
replacement of wearing parts.
3. The connecting thread cleaning torch
In the replacement of wearing parts or daily maintenance
inspection, must ensure that the torch of internal and external
thread cleaning. If necessary, apply more than 98% of industrial
alcohol cleaning or repair connection thread.
4 the contact surface of the cleaning electrode and the nozzle
Must ensure that the nozzle and electrode contact surface clean and
free of oil, if the contact surface with dirt, the torch will not
be able to normal working, should use such as hydrogen peroxide
cleaning agent cleaning.
5 check cutting gas and protective gas
Check the flow and pressure of cutting gas and protecting gas every
day, if the flow is not sufficient or leakage, should immediately
stop the trouble.
6 avoid torch collision damage
In order to avoid cutting collision damage, should be properly
programmed, the cutting speed limit to avoid walking. Install
anti-collision device can effectively avoid the collision damage
the cutting torch.
7. The damage reason of the most common torch
(1) the torch collision
(2) the destructive plasma arc due to the damage of the damaged
(3) plasma arc damage caused by the dirt
8. matters needing attention
(1) do not grease the cutting torch
(2) don't over use the "O - ring" lubricant.
(3) the protective cover is installed in the torch on the splash do
not spray chemicals.
(4) do not take manual torch when use hammer.