Plasma Cutting Nozzle 969-95-24190 0.8mm For Komatsu Plasma Torch
Nozzle, Komatsu Parts
. HEC Brand
We make metal cutting system and plasma cutter as well as torch and
consumables. We make plasma cutting machine and fiber laser cutting
machine with high quality and reliablity.
2. Cut Performance
HEC plasma consumables use high quality material and standard
process to make sure the highest quality. Our consumables cutting
performance is as the same as orginial OEM manufactory.
3. Good Price
HEC plasma consumables are good quality with low price make
customers best requirement and saving money.
4. Big Catagory
HEC sell all kinds of plasma consumables include Hypertherm, EASB,
Kjellberg, Koike and also supply some torch.
Q1:Can I get a free samples to check the quality?
A:Sure,we can supply the free samples but you need bear the express
cost by yourself.
Q2:Will I afford the carrier charge?
A:Yes,you will afford the express charge or your account is OK.
Q3:Can I add my trademark on my products?
A:Yes,we need your certificate of authorization.
|Machine||HEC NO.||Ref NO.||Description|
|L21750||969-95-24750||Shield Cap (<t6mm)|
|L21810||969-95-24810||Shield Cap (>t6mm)|
|L71320||969-95-24320||Guide A (Nozzle 1,3,1,1mm)|
|L71780||969-95-24780||Guide B (Nozzle 0.8,0.6mm)|
|L91410||969-95-24410||Shim for Outer cap|
|L81311||969-94-24311||Torch Body Kit|
|L81312||969-94-24312||Torch Body Kit|
|L21950||969-95-24950||Shield Cap 1.6|
|L21960||969-95-24960||Shield Cap 1.4|
| || || |
The maintenance of the plasma torch
1. to correctly install the torch
Correctly and carefully install the torch, and to ensure that all
the parts fit together well, and ensures the cutting gas and
shielding gas flow, before the installation will be all the
components on a clean cloth, avoid dirt adhesion to components. In
the "O" type ring with a little lubricant, "O" - shaped ring is
appropriate, should not be more.
2. the wearing parts should be replaced in time before the complete
Vulnerable parts are not used completely damaged after the
replacement of, because of serious damage to the electrode, the
nozzle and the eddy current ring will can not control the plasma
arc, cutting torch damage easily. So for the first time found that
the quality of cutting down, it should be timely inspection and
replacement of wearing parts.
3. The connecting thread cleaning torch
In the replacement of wearing parts or daily maintenance
inspection, must ensure that the torch of internal and external
thread cleaning. If necessary, apply more than 98% of industrial
alcohol cleaning or repair connection thread.
4 the contact surface of the cleaning electrode and the nozzle
Must ensure that the nozzle and electrode contact surface clean and
free of oil, if the contact surface with dirt, the torch will not
be able to normal working, should use such as hydrogen peroxide
cleaning agent cleaning.
5 check cutting gas and protective gas
Check the flow and pressure of cutting gas and protecting gas every
day, if the flow is not sufficient or leakage, should immediately
stop the trouble.
6 avoid torch collision damage
In order to avoid cutting collision damage, should be properly
programmed, the cutting speed limit to avoid walking. Install
anti-collision device can effectively avoid the collision damage
the cutting torch.