Swril Ring 120833 Hypertherm Plasma Consumables for Plasma Max200
We are a professional manufacturer of plasma cutter consumables,
Our company is located in the Shanghai City, China ,it was
established in 2007,but we had 10 years manufacturing experience in
this field, the new factory covers an area of more than 10000
square meters .There are 50-100 workers and 20 research engineers.
We can offer you all plasma consumables for hyptertherm, Kjellberg,
Esab, Koike, Komatsu, Thermadyne, such as: electrode, nozzle,
shield, swirl ring, inner cap, retaining cap, water tube, torch
body and so on.
|Machine||HEC NO.||Ref NO.||Description|
|H42837||120837||Retaining Cap ,40/100/200Amp|
|H82380||128380||Machine Torch Assembly|
|H92894||120894||Torch Mounting Sleeve|
|H92963||020963||Water tube, Standard|
1 plasma cutting technology
Plasma cutting is the use of high temperature plasma arc heat to
make the metal part of the incision at the local melting (and
evaporation), and by the momentum of the high-speed plasma to
remove molten metal to form a processing method of incision.
2 plasma cutting and flame gas cutting
Plasma cutting can only be effective as a conductor of metal - low
carbon steel, aluminum and stainless steel are typical examples. In
cutting low carbon steel, the operator will experience a higher
speed, deeper cutting effect.
Flame gas is cut through combustion at high temperature, or by
oxidation and cutting of metal. Therefore, the scope of its
application is limited to the steel of this type can be used in the
processing of black metal oxide technology. Metals like aluminum
and stainless steel will generate oxide bound further oxidation.
This makes the traditional flame gas cutting is impossible to deal
with this kind of material. Plasma cutting, and is not dependent on
oxidation treatment, so it can effectively cut aluminum, steel, and
other conductive metal.
And different kinds of gas can be used in plasma cutting, the
majority of people are using compressed air to carry out plasma
cutting. Air compressors are available in most cities, and
therefore, plasma cutting does not require a combustible gas or a
compressed oxygen and other gases as operating gases.
Plasma cutting is more expensive than flame gas cutting in cutting
thick plates, flame gas cutting does not need to connect the power
supply and compressed air, which is easier for some users to use.
Flame gas cutting is faster than plasma cutting in a thicker part
of the steel. But the plasma cutting machine in cutting the thin
plate cutting speed is much faster than the flame cutting, and the
efficiency is higher, the effect is better!
3 plasma cutting process
Plasma cutting is ideal for cutting steel and the thickness of less
than 1 inches of non-ferrous metal. Flame gas cutting requires the
operator to take care of the control of the large speed of the
examination of the large cut in order to keep the oxidation
process. Plasma cutting in this area is more elastic. Plasma
cutting is very good in some applications, such as cutting sheet
metal, it is impossible to achieve when using gas flame cutting. In
addition, cutting and mechanical comparison, plasma cutting speed
is much faster and easier for nonlinear cutting. In cutting
aluminum, copper, stainless steel and other metal materials are the
strengths of plasma cutting machine!