220991 Nozzle For Gouging Consumables, Professional Powermax
Each of our products has been tested with a rigorous precision
instrument, A large number of piercings tests and service life
tests, And made batch trial in our customers. If all results are
good, then we will producing them.
1. Cut Performance
HEC plasma consumables use high quality material and standard
process to make sure the highest quality. Our consumables cutting
performance is as the same as orginial OEM manufactory.
We make metal cutting system and plasma cutter as well as torch and
consumables. We make plasma cutting machine and fiber laser cutting
machine with high quality and reliablity.
3. Good Price
HEC plasma consumables are good quality with low price make
customers best requirement and saving money.
4. Big Catagory
HEC sell all kinds of plasma consumables include Hypertherm, EASB,
Kjellberg, Koike and also supply some torch.
|Machine||HEC NO.||Ref NO.||Description|
|H33754||220754||Retaining Cap 30/50Amp|
|H33176||220176||Retaining Cap 80/130Amp|
|H33355||220355||Retaining Cap 200Amp|
|H33433||220433||Retaining Cap 260Amp|
|H33603||220603||Retaining Cap (Bevel) 130/260Amp|
|H33756||220756||Retaining Cap 80/130Amp|
|H33757||220757||Retaining Cap 200Amp|
|H33760||220760||Retaining Cap 260Amp|
|H33635||220635||Retaining Cap 400/400Amp(Bevel)|
|H33740||220740||Retaining Cap (Bevel) 130/260Amp|
|H43173||220173||Retaining Cap 30/50/80/130Amp|
|H43398||220398||Retaining Cap 200/260/(Bevel)130/260Amp|
|H43747||220747||Retaining Cap 30/50/80/130Amp|
|H43637||220637||Retaining Cap 200/260/400Amp(Bevel)|
|H83818||128818||HPR torch assembly|
|H93571||220571||Water Tube with O-Ring|
|H93340||220340||Water Tube with O-Ring(30/50/80/130/200/260Amp)|
|H93700||220700||Bevel water tube(mild steel-130A)|
Frequently clear the torch on the protective cover in slag,
otherwise this slag will cause heavy destructive plasma arc".
Discharge of residual gases in advanced torch 11 after the
replacement of wearing parts
In replacement of wearing parts for a long time or stop, should
discharge torch in the residual gas (2 ~ 3 minutes is appropriate)
to ensure that the steam discharged from the torch.
To keep the 12 torch and wearing clean
In the cutting torch and wearing any stolen goods will seriously
affect the function of plasma system. Replacement of wearing parts,
to put it in a clean flannelette, and should always check the torch
connecting thread, with hydrogen peroxide cleaning cleaning of the
electrode contact surface and the nozzle.
1. clear air or oxygen nozzle oxides
When the air or oxygen is used as the plasma gas, the oxide is
deposited in the nozzle, which can affect the cutting airflow and
reduce the life of the wearing parts. Wipe clean with cloth inside
the nozzle can eliminate the oxide.
2. using softened water injection (plasma torch with liquid cooling
Hard water can cause metal impurities deposited on the nozzle ring,
which will affect the cutting air flow, thereby reducing the
cutting quality and shorten the service life of wearing parts.
3. check air flow and coolant every day
Damage to the torch of the most common causes of the lack of
coolant, which need to regularly check leading to the torch gas
flow and pressure (air), check the coolant pressure (liquid), if it
is found that the flow is not enough or leak, immediately stop and